Click Clack Fidget by Lossamoal

Lossamoal

Toys & Games>Other Toys & Games

GIF

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

ON/OFF inscription 3 colors 0.2mm layer, 2 walls, 30% infill

Designer

1.6 h

1 plate

4.7(12)

One color 0.2mm layer, 2 walls, 30% infill

Designer

43 min

1 plate

5.0(8)

Keychain version 0.2mm layer, 2 walls, 30% infill

Designer

43 min

1 plate

ON/OFF 2 PLATES 0.2mm layer, 2 walls, 30% infill

Designer

1.5 h

2 plates

Click to see more

Boost

152

255

267

216

Released

Description

CLICK-CLACK!
Perfectly reproduces the sound of an on/off switch!
In miniature format of 40X40X12 mm.
Only 6 pieces to print in total.
The axes between piston.stl and rocker.slt are only pieces of 1.75mm filament cut to a maximum length of 8mm (7mm would be ideal).
The first printing profile is in one object at a time mode, which allows you to have several colors and ON/OFF inscriptions.
The second printing profile is in normal mode, no ON/OFF inscription.
The third print profile makes this fidget a keychain version. During assembly, pass a loop of string through the two holes provided for this purpose.

CLIC-CLAC!
Reproduit à la perfection le son d'un intérupteur marche/arrêt!
Au format miniature de 40X40X12 mm.
Seulement 6 pièces à imprimer en tout.
Les axes entre piston.stl et bascule.slt sont seulement des bouts de filament de 1.75mm coupés sur une longueur maximum de 8mm (7mm serait l'idéal).
Le premier profil d'impression est en mode un objet à la fois, ce qui permet d'avoir plusieurs couleurs et les inscriptions ON/OFF.
Le deuxième profil d'impression est en mode normal, pas d'inscription ON/OFF.
Le troisième profil d'impression fait ce fidget une version porte-clé. Pendant l'assemblage, faire passer une boucle de ficelle dans les deux trous prévus à cet effet.

Comment & Rating (28)

@patrick33x

Print Profile

One color 0.2mm layer, 2 walls, 30% infill

Cool, fun idea

@Glaros

Print Profile

One color 0.2mm layer, 2 walls, 30% infill

nice design

(Edited)

@user_3756131240

Print Profile

ON/OFF inscription 3 colors 0.2mm layer, 2 walls, 30% infill

works good. disregard me printing the OFF text in green

@voez

Print Profile

ON/OFF inscription 3 colors 0.2mm layer, 2 walls, 30% infill

Printquality is good,but the print sequenze is not good, every color should be printed all parts at once and then change. And the first black piece of the case was printed only a few layers and finished as last part

The designer has replied

@user_636480210

Hi, I obviously tested this printing profile before publishing. I had no problems. I don't quite understand what you're trying to tell me I don't see any problems in your photos Be sure to calibrate your filament before printing. I used Bambu filament for this model, PLA basic

(Edited)