This art belongs to a reddit user that I found a while ago. Unfortunately I do not remember their name.
Baphomet in an ornate gothic style.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 134x200.94mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
]
Filaments Used:
PLA BambuLab Basic Transmission Distance: 0.3
PLA BambuLab Basic Transmission Distance: 2.5
PLA BambuLab Basic Transmission Distance: 6
This print uses 3 unique filaments but you may substitute to your tastes.
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #22 (1.84mm) swap to White for the rest.