Batman Emblem Shattered Hueforge

Printed on the Bambu Lab A1

Since all my filament is currently Elegoo filament, I had to make do with the following colors.

PLA Elegoo Black

PLA Elegoo Blue

PLA Elegoo White

Rapid PLA+ Elegoo Yellow

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used (In HueForge):
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue
At layer #16 (1.36mm) swap to Yellow
At layer #24 (2mm) swap to Jade White for the rest.