You can scale X and Y to make it bigger, but don't scale on Z or the print will fail.
If you want to try different colors, try referring to the transmission distance of your own color (if you don't know what TD your color have, just search how to find it on youtube).
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x101.2mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Sparkle Black Transmission Distance: 0.8
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Red Transmission Distance: 3.5
PLA BambuLab Glow Yellow Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Beige
At layer #12 (1.04mm) swap to Red
At layer #15 (1.28mm) swap to Yellow for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.