成品的效果可以看这个视频→JATE创意工作室的抖音 - 抖音 (douyin.com)
See the finished effect in this video
每个部件需要打印双份哦,因为是两个球,每个球分成了两半
You need to print two copies of each part, because it's two balls, and each ball is split in half
第一步:用绳子可以穿过孔后在末端打个结,视频中我用的是一小段TPU的耗材(使用TPU耗材的话需要将小孔用钻头扩大到1.8-2mm)
Step 1: Tie a knot at the end of the rope after passing through the hole. In the video, I used a small piece of TPU 1.75mm wire (if TPU wires are used, the hole needs to be expanded to 1.8-2mm with a drill).
第二步:在小球里放上米粒或者沙子,或者小颗粒状的物品;
Step 2: Put rice grains or sand, or small granular objects in the ball;
第三步:用力盖上另一半小球,这里一定要用力盖上哈;
Step 3: Cover the other half of the ball, here must be hard cover;
第四步:有条件的可以在接缝处用强力胶涂一道,防止老化后脱开;
Step 4: Conditionally, you can apply a strong glue at the joint to prevent it from opening after aging;
第五步:享受伴奏和解压的乐趣吧!
Step 5: Enjoy the accompaniment and decompression!