This model is designed to mount the Netgear GS305P switch under your desk.

The switch can be placed in the holder right side up or upside down.
The openings in the walls are intended for ventilation.

There are 2 countersunk screw holes for screws (I used 2 small 3.5x16mm screws).

If you like this model, feel free to buy me a coffee:
https://buymeacoffee.com/rivano

3D PRINTING SETTINGS

Printed with a P1S:
0.4mm nozzle
0.16mm layer height
15% infill
support enabled