A small hueforge, easy to print, for a nice secret location in the video game Duke Nukem 3D.

May a smile emerge on your face when you'll remember this place again.

The 3mf file has the layer swaps included, but if need be here are the hueforge instructions :

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 80x67.66mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.3mm and the Actual Depth is 1.4mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Basic Blue Gray Transmission Distance: 2
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 3.8
PLA PolyTerra Muted Red Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 5.4
This print uses 6 unique filaments

Swap Instructions:
Start with Charcoal
At layer #16 (0.76mm) swap to Blue Gray
At layer #21 (0.96mm) swap to Army Red
At layer #22 (1mm) swap to Red
At layer #27 (1.2mm) swap to Muted Red
At layer #29 (1.28mm) swap to Orange for the rest.

Happy printing !