Hueforge of a secret location in the video game Duke Nukem 3D.

Relive the joy of exploring that game and all the secrets it had.

The print profile includes the layer swaps, but here are the full hueforge instructions :

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 100x56.25mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.6mm and the Actual Depth is 1.1mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 3.8
PLA PolyTerra Muted Red Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 5.4
PLA BambuLab Basic Jade White Transmission Distance: 5.5
This print uses 6 unique filaments

Swap Instructions:
Start with Charcoal
At layer #11 (0.56mm) swap to Army Red
At layer #12 (0.6mm) swap to Red
At layer #15 (0.72mm) swap to Muted Red
At layer #22 (1mm) swap to Orange
At layer #23 (1.04mm) swap to Jade White for the rest.
 

Happy printing !