Bambu 3D Effect Sheets Fixture Tool - Free 3D Print Model

Search models, users, collections, and posts

Bambu Lab

3D Printer>3D Printer Accessories

IP Report

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

Fixture Tool

Designer

2.7 h

1 plate

4.8(2.1 k)

Fixture Tool for A1 Mini

Designer

2.7 h

1 plate

4.6(314)

The screws would break. Please be sure to print this 3/4 screw 0.2mm layer, 2 walls, 15% infill

38 min

1 plate

5.0(8)

with strong DIY screws, 0.2mm layer,2 walls,10% Gyroid infil

2.6 h

2 plates

4.6(8)

Click to see more

Open in Bambu Studio

Boost

1576

3581

2597

519

14.2 k

12.8 k

Released

Description

The 3D model is a specialized tool designed for use with Bambu Lab 3D printers. The tool is Bambu 3D Effect Sheet sticking hand tool, which assists in the process of adhering the Bambu 3D Effect Sheet to the printer's build plate. The tool is expertly crafted to provide an easy way to handle and use for prolonged periods.

How to install the Bambu 3D Effect Sheet

Installation steps

Step1: Wipe the printing surface with detergent

Step2: Place the Sheet and the spring steel plate on the Fixture tool

Step3: Tighten the screws on both ends of the fixture tool securely.

Step4: Peel the adhesive film on the back half way off and align the sheet with the plate and attach the edge

Step5: Loosen the screws and remove one piece of the fixture tool to use as a scraper.

Step6: Use the Fixture tool to press the sheet while continuing to remove the adhesive film.

Step7: Remove the film of the new Transfer Sheet.

Note

1. The 3D Effect Sheets don't come pre-applied on the steel plate. Manual installation is required before use.

2. For best results, we recommend applying the Bambu 3D Effect Sheets only on the official steel plate from Bambu Lab.

3. Bambu Engineering Plate can also be used for sticking the Bambu 3D Effect Sheets. If you plan to apply a 3D Effect Sheet on an existing plate, ensure that you remove the previous sheet and clean any glue residue completely, before installing the 3D Effect Sheet. Make sure the surface is dry and clean before the application.

4. Please set the Plate Type to Smooth PEI/High Temp Plate and carefully follow the Heatbed Recommended Settings when using the Bambu 3D Effect Sheets.

5. The 3D effect patterns require a clean surface to remain visible. Grease can cause the patterns to disappear. It is essential to keep the surface clean. We recommend using hot water and detergent for cleaning, and avoid touching the surface.

Considerations

1. Due to reflections, the LIDAR calibration will not work as expected when using Effect Sheets. We recommend skipping the LIDAR calibration sequence, or calibrating with a regular plate.

2. The 3D Effect Sheets are considered consumables. To prolong the lifespan of the transfer textures, try placing your print objects on different areas of the sheet.

3. Do not apply glue to the sheet surface.

4. Pay close attention when using a scraper to remove prints, to avoid damaging the sheet surface.

Print Plate

3D printing