Cave Bear in a Cave

Cave Bear in a Cave

Boost
2
2
0

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.08mm layer, 2 walls, 100% infill
0.08mm layer, 2 walls, 100% infill
Designer
5.8 h
1 plate

Boost
2
2
0
0
2
0
Released

Description

A menacing bear emerging from a cave.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Matte Dark Brown Transmission Distance: 2
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments but you may substitute as needed.

 

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Brown
    At layer #12 (1.04mm) swap to Gray
    At layer #27 (2.24mm) swap to White for the rest.
 

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more