Hardware:
Reuse original bolts to fasten feet.
Printing instructions:
Print Antivibration Feet in TPU. No Supports Needed. 10 to 15% infill. 3 walls for vertical and horizontal top and bottom.
The infill and number of walls may vary between different brands of TPU.
I used Sunlu TPU 95% Shore Hardness with 10% infill. For instance, the same setting wouldn't work on Naga TPU it was too soft compared to the Sunlu same 95% Shore Hardness But had to print with 15% infill to achieve the same result.
So, my recommendation is to print one to get the desired softness you are looking for. I recommend a medium hardness with a little squish. If you want harder or softer adjust as needed.
Benefits
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.