Hello everyone, for the first time, let me introduce this model in detail here

Firstly, I recommend printing a size of 20% for this model (if it is too small, the antenna may break and it is not easy to play with)

The recommended outer printing speed is 20% (otherwise the antenna on the head is prone to deformation)

There are two models in total, the difference is that the depiction that requires coloring will be lighter, and the coloring effect will be more cute and beautiful. Facial depictions that do not require coloring will be darker.

If anyone needs it in the future, I will transform it into a piggy bank, which is also a very, very good choice.

If there is a need for coloring, it is recommended to use propylene which is more environmentally friendly. 

Because I don't have a high-precision machine like P1P, I don't have the actual printing effect (it's just that the printing is rough and I don't want to show you). I'm sorry.

---2024/6/21 Add a point that 1-1 is a colored model, 1-2 is a lazy model, even if it is not colored, it can have a good effect (I also bought P1SC at a low cost, and then add an ams multi-color printing configuration)

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

大家好，初次见面在这里详细介绍一下这个模型

首先，这个模型我推荐打印的大小为：20%  （太小头上天线会断，也不好把玩）

外层打印速度建议为：20%  （否则头上的天线容易变形）

一共有两个模型，区别在于需要上色版本的刻画会比较浅，上色效果会更可爱好看。不需要上色的脸部刻画会比较深。

后续如果大家有需要我会将其改造成一个存钱罐，也是非常非常不错的选择

如果有上色的需要，建议使用丙烯会比较环保。

因为我没有p1p这种高精度的机器，所以没有打印的实际效果（其实就是打印的比较粗糙不想给你们看）抱歉抱歉

---2024/6/21补充一点1-1是上色款，1-2是懒人款，即便不上色也能有不错的效果（我也是下血本买了p1sc，后续补充一个ams多色打印配置）