The stand I made for my iphone 15pro.
All Apple phones with magsafe specifications can be used, but the 6.7-inch size may not fit vertically. If you try it, you can leave a message below and I may modify the applicable version.

This model is primarily divided into three parts: the MagSafe case, base, and base cover. The MagSafe case also includes an additional board model used to avoid support. During printing, it's possible to pause the print, place the board in the calibration position, and then continue printing.

I still retained the model that requires support, so pausing the print isn't necessary.

The MagSafe case and the base are connected via calibration, and both have reserved holes and positions for wiring.

The base is designed to be hollow, providing space to place coins or other weights to increase the stability of the shelf, or to store excess wires.

The MagSafe case features a Voronoi pattern design.

Please let me know if you have any questions

我為我的 iphone 15pro 製作的支架。
所有擁有magsafe規格的apple手機皆可使用，但是6.7 吋的尺寸放置直向可能不合。如果你嘗試了可以在下方留言，我可能會修改適用版本。

這個模型主要分為三個部分：MagSafe外殼、底座和底座蓋。MagSafe外殼還有一個額外的板子模型，用於避免支撐。打印時，可以暫停列印，將板子放置在卡準位置後繼續列印。
我仍保留了需要支撐的模型此就不需要暫停列印。

MagSafe外殼與底座通過卡準連接，兩者都有預留走線的孔洞和位置。

底座為中空設計，其中空間可以放置硬幣或其他重物，以增加架子的穩定性，或用來收納多餘的線材。

MagSafe外殼具有Voronoi紋路的外觀設計。

如有任何問題請告訴我