3D print a Garden Snail Diorama made from 3:1 scale replica of popular toy interlocking bricks.
It is recommended to use the print profile I have provided to print this model. I can't guarantee that you will achieve the same success I have, but after several test prints and trial and error, I know this to work. I also recommend printing on a smooth surface PEI plate so your pieces are not textured.
The print profile is separated by color on each plate. You can use whatever filament you have on hand, but I used:
The print profile is set up to print two wall loops and 10% infill on Gyroid, however you can tweak to your liking.
Again, I recommend the settings I have in the Print Profile. Some parts can be printed without supports, as the Bambu bridges the pieces very well, but the ones that need them are already set up to be supported and also easily removable. Some may need needle nose pliers to be removed.
Directions to assemble are attached in PDF format.
That about covers it. Happy printing and building!
Want to print more? See my profile for other 3:1 scale replica building sets!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.