I remodeled another tracksaw wall mount I found online. This one fits for the Wen Tracksaw Tracks. It can be used with M4 threaded inserts OR just M4 Nuts. If you use the threaded inserts, you CAN use washers which are press fit and the M4 screws can be 12mm in length. If you choose to use an M4 nut, you can use an M4 screw that is 24mm in length. I've also added a little grip to the knob to make it easier to lock and unlock the mounts. These fit just perfectly allowing the tracks to slide ever so slightly which prevents any tension to the tracks like others I've tried. The top part doesn't touch the plastic guide and only touches the metal part of the track.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.