I noticed that the bowden tube is not well supported on a stock Creality Ender 5 Pro so I created this simple clip/holder to give it a bit of extra support.
No screws needed, it just slides over the tube and sits on top of the hot end support bracket.
If needed you can use a 4mm steel drill bit to open up the tube hole on the print if it's not quite perfect. (I needed to do this as it came out a hair too small)
Update 02Feb2021Added a slightly chunkier V3 of the design as the V2 one snapped after 6 months use.
I was happy with 6 months use, but if you can beef it up and have it last even longer then happy days :)
If you love this design, feel free to buy me a coffee and I will love ya for it :)
Enjoy.
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
No Supports needed if you print it in the correct orientation.
I added more walls to make it stronger :)
I needed to drill it out to 4mm (as it came out a 3.9mm - I need to calibrate my printer LOL), but hopefully you won't need to.
Fusion360