Summary

I was inspired by TiSiAi 's GTi keyring.

I designed this from the ground up using Fusion 360 as my car deserves a posh key hook LOL

I also included STL's that you can print to cover the screw sections if you wish. You could colour code them to match the wall behind so that they blend in. They are an exact extrusion of the gaps, so they may be a little tight. You might want to play around with scaling them down slightly if they are too snug. Also... they may not come out once they are in, so be sure you are happy with this!

If you love this design, feel free to buy me a coffee and I will love ya for it :)

Print Settings

Printer Brand:

Creality

                                            Printer:                      
Ender 5

Rafts:

                                            Supports:                      
No

Resolution:

0.2

                                            Infill:                      
50%

Filament: ICE PLA
Mixture

                    
                        Notes:                     Do a colour change at the layer where it first stats printing ONLY the GTI Letters (i.e. it has finished the main honeycomb body and hooks, and only has the 3 raised letters left to print. (That is layer 71 in Cura)

NB The 3 letters are 3mm taller than the main body.

Print it as designed with the part that would touch the wall being on your build plate.

It should print with no supports as the hook overhang angles are not too steep :) Enjoy!