Make My Vase x LED LAMP x IKEA STRALA

Turn your vase into a stylish LED lamp. Make your own LED lamp with MAKE MY VASE!

Step by Step

1. Open: https://makerworld.com/makerlab/makeMyVase

2. Design a vase with a round opening. The diameter must be 120mm so that it fits on the base.

Make sure that this diameter is at least 20mm in order to fit well. (see images)

You can let your creativity run wild

3. When you have finished your design, download the vase as SpiralVase

4. Open in BambuStudio

5. Start your printing with the following parameters:

Turn the vase upside down to print!!

Nozzle: 0,4

Walls: 2

Top Layer: 0

Bottom Layer: 2

Infill: 0%

6. Once the vase is printed, you can place it on the base and your lamp is finished!

You also need the IKEA Strala.

Bear in mind that if you are using a Voronoi vase design, you will also need to increase the diameter of the vase so that it fits on the base.

💡💡💡

If you like my simple design, you can of course also print these. But I am also looking forward to your designs. Feel free to share them 🤖

Powered by Make My Vase from MakerWorld (https://makerworld.com/makerlab/makeMyVase)