Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170.02x120.69mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PETG JAYO White Transmission Distance: 6
This print uses 5 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #10 (0.88mm) swap to Blue
At layer #12 (1.04mm) swap to Orange
At layer #16 (1.36mm) swap to White for the rest.