This is a 2-part lightbox:
+ The colors of the logo will really pop only if the room is dark enough.
+ The 2 parts snap in place with a little pressure, no glue needed.
+ There is a keyhole slot at the back for easy wall mounting.
Front panel:
This uses the PLA CMYK Lithophane Bundle from Bambu Lab.
https://eu.store.bambulab.com/en-be/products/pla-cmyk-lithophane
I do not recommend other colors.. you can try but i don't
know what the result is gonna be.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab White Transmission Distance: 9.6
PLA BambuLab Basic Yellow Transmission Distance: 4
PLA BambuLab Basic Magenta Transmission Distance: 4
PLA BambuLab Basic Cyan Transmission Distance: 4.8
Swap Instructions:
Start with White
At layer #6 (0.56mm) swap to Yellow
At layer #10 (0.88mm) swap to Magenta
At layer #13 (1.12mm) swap to Cyan for the rest.
The housing:
I recommend black for the housing because any other
color would let light trough.
If You have any other questions, feel free to contact me!
All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..
So, if you like my work you could
buy me a coffee if you like. 😉
https://www.buymeacoffee.com/a.vdh_83
Or a donation via Paypal is also much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL