Hueforge model - print it and add stickable magnetic sheet (like these ) to make awesome RCB fridge magnets.

Print these and support RCB! Ee Sala Cup Namde!

Print settings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 138.24x160mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
    PLA+ Numakers Pitch Black Transmission Distance: 1.6
    PLA+ Numakers Nuclear Red Transmission Distance: 4.8
    PLA+ Numakers Teal Blue Transmission Distance: 4.8
    PLA+ Numakers Pure White Transmission Distance: 4.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Pitch Black
    At layer #6 (0.56mm) swap to Nuclear Red
    At layer #13 (1.12mm) swap to Teal Blue
    At layer #19 (1.6mm) swap to Pure White for the rest.