Deadpool HueForge
Can be printed at 200mmx200mm or 100mmx100mm
Do not change Z Height
Printed with a border so that it can be resin filled
Mouse Ears added for corner stability and adhesion for the long print. They should snap or flush cut off with ease. Do not change wall count. You will see that the mouse ears and hueforge itself have different wall counts. This is by design.
Look out for more of my HueForge collections being uploaded.
This profile also uses my optimized GCode. It is recommended to prewarm bed to 65C then start the print. I wipe my bed with 91% ISO prior to each print and I rarely, if ever, have adhesion issues.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm
The Model is 200x200mm or 100x100mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 6.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 4 unique filaments
Swap Instructions:
Start with Jade White
At layer #24 (1.92mm) swap to Scarlet Red
At layer #30 (2.4mm) swap to Red
At layer #35 (2.8mm) swap to Black for the rest.
HueForge Commercial License # 32061
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.