Deutsch steht weiter unten!
Englisch:
Here I printed a self-drawn Vfl Bochum lamp with my Bambu X1C with 0.4mm nozzle.
You need the following accessories:
2x M3 screws possibly with nuts! The parts can also be glued!
Switch 1x https://www.amazon.de/gp/product/B07TYM5PVV/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Battery 1x https://www.amazon.de/dp/B09M72DGJK?psc=1&ref=ppx_yo2ov_dt_b_product_details
I use 6 LEDs arranged in a circle and one in the middle https://www.amazon.de/dp/B07C1PQMNC?psc=1&ref=ppx_yo2ov_dt_b_product_details
1x battery compartment https://www.amazon.de/dp/B09NPY9VB6?psc=1&ref=ppx_yo2ov_dt_b_product_details
and a little cable as well as heat shrink tubing and or Wago clamps 211 2x 2 and a soldering iron
It's just an example of how I did it, of course you could also print the lamp without LED, it looks good too!
Or you can do it with an LED strip!
I would like to point out that this lamp is for decoration only!
Deutsch:
Hier habe ich eine selbst gezeichnete Vfl Bochum Lampe gedruckt mit meinem Bambu X1C mit 0,4mm Düse.
Ihr benötigt folgendes Zubehör:
2x M3 schrauben evenutell mit muttern! Die teile können aber auch geklebt werden!
Schalter 1x https://www.amazon.de/gp/product/B07TYM5PVV/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Batterie 1x https://www.amazon.de/dp/B09M72DGJK?psc=1&ref=ppx_yo2ov_dt_b_product_details
LED´s ich nutze 6 Stück im Kreis angeordnet und eine in der Mitte https://www.amazon.de/dp/B07C1PQMNC?psc=1&ref=ppx_yo2ov_dt_b_product_details
1x Batteriefach https://www.amazon.de/dp/B09NPY9VB6?psc=1&ref=ppx_yo2ov_dt_b_product_details
und ein wenig Kabel sowie Schrumpfschläuche und oder Wago Klemmen 211 2x 2er sowie Lötkolben
Es ist nur ein Beispiel, wie ich es gemacht habe, natürlich konnte ihr die Lampe auch ohne LED Drucken sieht auch gut aus!
Oder ihr könnt es mit einem LED Streifen machen!
Ich verweise darauf, dass diese Lampe nur als Deko dient!