31.05.2024 Update

• Added thicker walls to reduce see-throughness
• Added three new plates - mainly with new model for Crescent and for the Crystal. Old models are still available in project files (have “old” added to their plate names)
  • Changed crescent model - it has now a much better shape, but is more difficult to print, thus requires a raft. New version of crescent is compatibile with most of the old parts, however it requires printing new crystal as well.
  • Changed crystal model - to make it fit new crescent
  • Handle-Cap-Dowel - I noticed original dowel ended up being few mm too tall so I reduced the size and added it on a new plate

Original upload

Moon stick is a cosplay project made for a friend and thought I will share with others. It is not particularly hard to print, requires some minimal assembly and glueing together. Might need some sanding/filing because I noticed that two coloured pla's shrink differently and it is harder to get the proper values right. Your milage might vary if you use different materials than I did.
I personally used a eSuns pink and yellow PLA+ and eSuns white PETG (had it at hand + more shiny than PLA).

Assembly manual: