Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 137.85x220mm in size; if you change the size DO NOT change the z Height.

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA Elegoo Space Gray Transmission Distance: 0.6
PLA Elegoo Gray Transmission Distance: 0.7
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Space Gray
At layer #13 (1.12mm) swap to Light Gray
At layer #20 (1.68mm) swap to Jade White

At Layer #34 swap to Black