This is a design by me, transformed into a filament painting using Hueforge.
If you scale it, don't change the height of the image.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA MATTE Sunlu Matte Black Transmission Distance: 5
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Red Transmission Distance: 6
PLA+ eSUN Yellow Transmission Distance: 5
Swap Instructions:
Start with Matte Black
At layer #5 (0.56mm) swap to Grey
At layer #8 (0.8mm) swap to Red
At layer #16 (1.44mm) swap to Yellow for the rest.