Set of various Shelves for HSW Honeycomb Wall
Copyright Claim
Set of various Shelves for HSW Honeycomb Wall
Boost
80
262
39
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
2.8 h
1 plate
0.2mm layer, 2 walls, 15% infill
2.1 h
1 plate
Boost
80
262
39
2
394
359
Released
Description
Set of 5 different style Shelves for Honeycomb Storage wall.
Shelves are 100-120mm wide and 50-60mm deep.
Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little sanding will be needed on fixings if they will very hard fit as I made them to be in place strong and for my Bambu X1 printer they fit just perfectly.
Enjoy
You can Buy me a coffee if You feel good doing so :) (And very big Thank You For interest in my work)
https://www.buymeacoffee.com/warlogh
Comment & Rating (39)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Petg Green
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I’m printing a bunch of these to help organize my bathroom. they came out great!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed up very nicely. a little too snug on my honeycomb adapters, so I’ll have to scale those up just a tick. thanks!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed a few shelves for my hobby wall to hold paint thinners and glues. Works great
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
nice design, thnaks
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfect for my needs.
1
Reply
thanks. glad to hear :)
(Edited)1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great little bins
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Pegs were a little too tight going into standard HSW. Will have to sand down to fit. Overall cool trays!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
These print well and work, but they're pretty hard to get into the connector pieces for the hsw.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed easily. perfect for what I needed. thanks!
1
Reply
© 2024 MakerWorld