Octopus Wine bottle holder by All Things STL

All Things STL

Art>Sculptures

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 35% infill

Designer

14 h

1 plate

5.0(4)

0.2mm layer, 3 walls, 35% infill

Designer

8.8 h

1 plate

4.0(2)

Brim 0.2mm layer, 3 walls, 35% gyroid infill

11.9 h

1 plate

5.0(1)

Boost

335

379

518

151

Released

Description

All Things STL wine bottle holder: Does require 2 small tree supports. There are two different models one for 200x200 plates and one for 220x220 plates. If you have a Prusa (or this size printer) print the 200x200 If you have a larger printer then you can print the 220x220 See pics for tree support. Please message me if you have any questions or issues!

Scale to 73% and that works perfectly!

Comment & Rating (40)

@MaxPowerPrints

I will upload a remix today. I have the same problem as everyone else, the wine bottle doesn't fit. I did an analysis and it looks like it needs to be scaled to fit a standard bottle. But I will try it out first and give an update here.

(Edited)

The designer has replied

@user_820738797

thank you!

@AllThingsSTL

You just need to resize the file! It works perfectly based on the size of Printer you have. I have a Voron and a Bambu and I have printed on both. Let me know if you need me to resize it to a certain size I would be happy to do that.

@KKkreative

what can i say part from it printed beautiful as you can see in the photos. i hope you make more octopus items so i can add them to my collection. thank you keep up the great work.

@spud2077

one of the tentacles got knocked over besides that it's a beautiful model

@chrissyeccy

Exactly same thing just happened to. At the same point. Would a bigger brim help with this. I would love to print it again. Can anyone advise please.

@userTHX1138

Boosted

It seems like a few others had issues with printing this model. My first attempt failed 25% through because a limb detached from the plate. I add brims and support to one of the extended tentacles, just to be safe. I appreciate the detail in this design and the end product is beautiful. Thank you!

@baraopira

Boosted

Print Profile

0.2mm layer, 3 walls, 35% infill

it is really cool

(Edited)

@user_3366008316

Boosted

Print Profile

0.2mm layer, 3 walls, 35% infill

Worked great!!

@websherpa

Thank you, amazing model! There was only the one 200 x 200 mm plate here on Maker World, but I found the 220 x 220mm plate elsewhere. First attempt on new A1 failed (a leg piece came off the bed). 2nd attempt I added a couple additional minor supports, bed to extreme overhangs only, and used Elmer's Extra Strength Glue Stick on my stock A1 PEI textured bed. Came out extraordinary and holds a standard wine bottle fine, although snuggly. Now a little modification and maybe it will hold a bottle of Kraken Spiced Rum, which would be fitting!

@user_820738797

I didn't read first and now have the version that won't fit a wine bottle. What do you use the small one for?

(Edited)

The designer has replied

@user_820738797

ok, so there's only one file. If this is supposed to be for a wine bottle, either upload the other file or tell us what to scale it to

@AllThingsSTL

Replying to @user_820738797 :

You can use the scale tool in your slicer to adjust the STL to fit your printer. If that does not work message me directly the size of your printer and I will adjust it for you!

@user_3136084832

made one but it will not hold my bottle of wine just a normal bottle

The designer has replied

@user_1804974066

Same here, a1 mini model.

@Ginger_Snapped

Replying to @user_1804974066 :

I had the same issue, a standard wine bottle would not fit at all ( actually broke off an arm when trying to put one in ). Printed just fine. I also did the variable layer height.

@AllThingsSTL

Replying to @Ginger_Snapped :

I tried 5 diffferent wine bottles and they all fit no problem. You can use more infill or walls to create a stronger print.