Hi everyone
This is my first contribution to makerworld.
In memory of the legend AYRTON SENNA portrait worked on HueForge.
This picture is a final picture, HueForge 206x86mm.
Printed with AMS.
Swap Instructions:
- Start with Blue
- At layer #9 (0.8mm) swap to BambuLab Green
- At layer #14 (1.2mm) swap to Lemon Yellow
- At layer #21 (1.76mm) swap to Ivory White
- At layer #29 (2.4mm) swap to Lemon Yellow for the rest.
Filaments Used:
- PLA BambuLab Basic Blue Transmission Distance: 4
- PLA BambuLab Basic BambuLab Green Transmission Distance: 2
- PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
- PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Please "Like", review, follow and upload make.
I spend a lot of time designing and allow it all to be used for free (including commercially).
EASY PRINT
ENJOY
____________
Ciao a tutti,
Questa è la mia prima contribuzione a Makerworld.
In memoria della leggenda AYRTON SENNA, ho realizzato un ritratto utilizzando HueForge.
Questa è l'immagine finale, realizzata con HueForge, dimensioni 206x86mm.
STAMPATO CON SISTEMA AMS
Istruzioni per il cambio dei filamenti:
- Iniziare con il blu.
- Al layer #9 (0,8mm) passare al verde BambuLab.
- Al layer #14 (1,2mm) passare al giallo limone.
- Al layer #21 (1,76mm) passare al bianco avorio.
- Al layer #29 (2,4mm) tornare al giallo limone per il resto della stampa.
Filamenti Utilizzati:
- PLA BambuLab Basic Blu - Distanza di trasmissione: 4
- PLA BambuLab Basic Verde BambuLab - Distanza di trasmissione: 2
- PLA BambuLab Matte Giallo Limone - Distanza di trasmissione: 4
- PLA BambuLab Matte Bianco Avorio - Distanza di trasmissione: 3.5
Questa stampa utilizza 4 filamenti unici.
Per favore, mettete "Mi Piace", recensite, seguite e caricate il vostro progetto.
Ho dedicato molto tempo alla progettazione e permetto che venga utilizzata gratuitamente (anche commercialmente).
BUONA STAMPA E DIVERTITEVI.