模型的各个零件我几乎没有预留公差，所以零件直接的组合可能会比较紧，可以适当打磨，或者在bambu studio软件里设置xy补偿，我上传了fusion360的源文件，你也可以修改模型以满足你机器的打印公差，当然你也可以尝试修改模型加入你自己的设计。

我尝试使用了新推出的斜拼接缝，表面的确变得更平整了，但也容易出现孔洞，请按需要决定是否要使用这个设置；

我把不同颜色尽量设计成一样的高度，这样可以用较少的换料次数完成多色打印，按照我的打印设置，只需要换两次料就可以完成打印了

I have hardly reserved tolerances for each part of the model, so the direct combination of parts may be relatively tight, which can be properly sanded, or xy compensation can be set in bambu studio software. I have uploaded the source file of fusion360, you can also modify the model to meet the printing tolerances of your machine. Of course you can also try to modify the model to add your own design.

I tried to use the newly launched Scarf joint seam feature, the surface does become smoother, but it is also prone to holes, please decide if you want to use this setting as needed;

I try to design the different colors to the same height, so that the multi-color printing can be completed with less times to replace the consumables, according to my printing Settings, only need to replace the consumables twice to complete the printing