⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) and print my bulletproof “Designer” printprofiles!🙏👍 Thank you in advance!🙏
A1/A1mini AMSlite has a great design, but I think it would be nicer to have the option of connecting external filament dry boxes (or such Dust-Protector like my Duster) with the help of PTFE tubes. And with the way filaments tend to wear out the edges of the feed funnel, it's nice to have some level of protection on the AMSlite. The PTFE connectors for AMSlite, which I could find so far either didn't hold properly or were very difficult to remove after installation 😳
So, I designed my own😉, which has 2 clamps which hold the connector firmly on the funnel and release it easily when clamps will be loosing! 😎Additionally, I shaped PTFE channel in the way, that it points to the center of the spool and thus feeds filament into AMSlite at a more optimal angle. Even with almost empty filament spools, filament is fed into AMSlite at a better angle.
These little helpers have beautiful dice symbols to number the filament inputs on the AMSlite. This is especially helpful when installing AMSlite vertically!
Thanks to my supporter and tester SteveKratz and PrintWarrior! 🦾😍
With their great help I was able to check and improve the functionality of this design!!! 🙏❤️👍
Steve - thank you for some awesome pictures too! 🙏
⚠️This model must be printed in PETG filament! PETG is very important for the function of the clamps! Printed with PLA, for example, they won't last long on the AMSlite! ⚠️
⚠️I recommend to use my print profiles - there are all these settings well done and tuned!
⚠️Stick the PTFE tube through the inner hole about 1/8 of an inch (2mm), like you can see this in the pictures and it will keep the tube properly in!⚠️
— ! —
Thanks for downloading, rating in advance and please don't forget to like👍and to BOOST 🚀 this model! ;-)
If you like my work and want to support me - please follow me here and on Instagram. If you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop
Thank you for your support and.. happy printing!
Ed ;-)
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.