Hello Everyone,

This is the second page of Death Note's rules printed with 0.2mm nozle

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 116.45x180mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 0.88mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO White Transmission Distance: 6
This print uses 2 unique filaments

Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to White for the rest.

Feel free to share the results! :D