DanJaxta

cover

HS Stand empty_55af99ed-38f6-4168-91ac-3a3d5e499e7f.jpg

HS Stand_88593545-f1c5-4e58-90ed-1a960dd86d82.jpg

plate_1.png

plate_2.png

HS Stand empty_55af99ed-38f6-4168-91ac-3a3d5e499e7f.webp

plate_1.webp

plate_2.webp

Screenshot 2024-05-17 132637_1d9e5679-8a9d-4ecf-bc21-84995f07097d.webp

I used strength profile with 25% grid infiltop surface - Octagram Spiral - this looks so cool when printed with silk materials!Bottom surface - ConcentricI slowed down the top surface speed to 60mm/s which gave better results than default, I think this could be tweaked furtherYou only need support enabled for the stem (plate 2)You only need prime tower for the base (plate 1)I added a colourised collar at the bottom of the stem on the base as this was much easier than tuning the flush settings for the colour changes

0.2mm layer, 6 walls, 25% infill

A basic headset stand split into 2 so it can be printed on the A1 mini.&nbsp;I have noticed some variations in tolerance depending on what materials its printed with so the join has a 0,2mm tolerance which means it should slide together quite firmly but I did notice on Sunlu matte black the fitment was more loose so a bit of glue might be preferable but not essential

Headset stand

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models