Based on P1P official CAD enclosure
If you like the design, I would be flattered to receive a little tip via PayPal: PayPal
It is not fully tested but should work, please start with one corner first and see how it fits. Let me know if any adjustment needs to be made.
-How to mount:
The corner pieces attach with self tapping screws from inside and normal screws in the rear, these are supplied with the printer so you should have everything already.
-Print Settings:
I recommend using a minimum of 3 walls, top and bottom and infill of 20% or higher. Also, a wide enough brim is highly recommended to ensure bed adhesion, most parts are thin and tall.
Please keep in mind that this design is published under a NON COMMERCIAL license, so please do not sell the design or prints made with this design.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.