A1 MINI SIDE BOX增加加防尘和主板侧出风口风扇位

Remixed by

A1 MINI SIDE BOX增加加防尘和主板侧出风口风扇位

Remixed by
Boost
3
12
15

Print Profile(4)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 25% infill
0.2mm layer, 2 walls, 25% infill
Designer
4.3 h
1 plate

0.2mm layer, 2 walls, 25% infill
0.2mm layer, 2 walls, 25% infill
Designer
5 h
1 plate

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
5 h
1 plate

0.2mm layer, 2 walls, 25% infill
0.2mm layer, 2 walls, 25% infill
Designer
6.1 h
3 plates

Boost
3
12
15
0
19
0
Released

Description

5.26更新第4个3mf,应要求位移版本,提供6015,6010,6025风扇罩

对原side box进行了修改,增加了无支撑的一体电源防碎屑盖子

还提供4cm,6cm侧面风扇固定架,需要支撑,辅助主板散热,减少封箱后过热丢步,延长主板寿命

另外请根据使用材料的收缩率不同自行调整缩放,当然这可能导致风扇孔位发生兼容性问题,推荐使用较耐温的材料防软化缩变,实测该位置外壳可到五十六度

 

machine translation

 

Modified the original side box by adding an unsupported power supply debris proof cover

 

We also provide 4cm and 6cm side fan mounting brackets, which need to be supported to assist the motherboard in heat dissipation, reduce overheating and step loss after sealing, and extend the lifespan of the motherboard

 

In addition, please adjust the scaling according to the different shrinkage rates of the materials used. Of course, this may cause compatibility issues with the fan hole position. It is recommended to use materials that are more heat-resistant to prevent softening and shrinkage. The actual measurement shows that the shell at this position can reach up to 56 degrees

 

Comment & Rating (15)

Please fill in your opinion
(0/5000)

为啥不在往右边点
The designer has replied
0
Reply
怕如果要插拔卡时手容易碰到风扇叶子
0
Reply
Replying to @user_2183084378 :
为啥不做个风扇罩子
0
Reply
Replying to @user_287903907 :
会减少风量,增加风燥,除非罩子做的负压区间大,但那样太厚了
1
Reply
各位有装上这个经常提示打印板放歪或者裹头的提示么?查不出原因,不知道是固件更新问题,还是怎么着,说是打印板附近有异物也会误报
The designer has replied
0
Reply
我之前出现这情况是手把打印板碰歪了,后面隔三岔五就开始提示这个,可以把裹头检测关了,这么多次真裹头也检测不出,还可能导致溢料
0
Reply
Replying to @user_2183084378 :
裹头检测就没开过,不知道是不是bug,喷头已经把盒子戳了个小洞。。
0
Reply
Replying to @leeziyang :
喷头戳到盒子?这个盒子是根据a1 mini box的基础上设计的,那个模型已经被下载了上千次了,除了因为材料收缩不同要自己微调下宽度,没看到这个问题。另外g代码是有限位的,盒子是在打印位外的,你这个有点像a1mini的刮板bug
0
Reply
Mini摸着真是烫手,风扇往里吹还是往外抽哪个效果好
The designer has replied
0
Reply
主板散热话,建议外抽,因为里面风扇是从下吸风那个孔出气,大概降个七八度,
0
Reply
Replying to @user_2183084378 :
感谢指导,模型已经打好了,等风扇。。
0
Reply
如何接线
The designer has replied
0
Reply
外置usb,dc或pwm供电,或者从ams口那引出24v,b站有人做了ams口降压转出线
0
Reply
好东西,哈哈,现在已经有了挤出机和主板散热了,什么时候把x,y电机散热也安排上
The designer has replied
0
Reply
我用热成像看过A1mini的x轴散热需求不大,不过我主页也有画。但y轴主要热源在下方,要在低部下手,比较麻烦
0
Reply
No more