Slim yet tall hueforge - good for school binders or display on your desk - 3 colors - change the yellow to any other highlight as desired - silver would make for a nice grayscale

--

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.12x220.94mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Overture Yellow Transmission Distance: 9.7
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Yellow
At layer #15 (1.28mm) swap to Jade White for the rest.