Summary

Hybrid 3d printed and cardboard tile and token crate sized for Mansions of Madness but suitable for other games. Follow the assembly instructions image. You need 1 of each item and 4 trays.

The create is designed for 4mm cardboard, though you can use 2mm if you fold at least the ends on themselves to double the thickness. The cardboard can be whatever length you desire however I highly recommend that you make the base and lid out of a single piece for structural stability. If you want to use the token holder, it hangs on the side walls so you will need to make sure there's a few mm of space between the base and the lid.

I used a medium sized target box in the photos but any cardboard that's the right thickness should work, or probably foamcore or thin plywood. Graphics are up to you, mine are from all over the internet and copyrighted by others so I don't feel comfortable sharing.

NOTE: the side panels are printed in one piece with working hinges however these are the most fragile part of the model. If they break, no fear, they're designed to accept a typical wood screw with a built-in pilot hole.

Leave a message in the comments if you have a request for a special thickness or tray composition that you need.