Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 148.98x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PLA Bambu Cian Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cian
At layer #9 (0.8mm) swap to Jade White
At layer #15 (1.28mm) swap to Black
At layer #18 (1.52mm) swap to Red
At layer #25 (2.08mm) swap to Jade White for the rest.