Plane Model: Reptile Dragon 2

Use: Mounting plate for the top cover.

Files:
- Blank plate 2mm & 4mm
- Plate with standard GoPro mount 2mm base for RIGID filament
- Plate with standard GoPro mount 4mm base for FLEX filament
- STEP file to unleash your creativity

I suggest that this is printed in TPU at 100%/high infill for 2 reasons:

1. The top plate cover on the model has a slight bow to it - allows mount to conform
2. Allows you to run some zip ties through the two extra holes as a backup.

If you are using Rigid filament (PLA/PETG/ABS etc.) the 2mm version can be used. Alternatively, please modify the .step file as you please.

Hardware:

RIGID 2mm
4 X 10mm M3 Flat Hear Screws (Model is designed with flat head screws, adapt where necessary
2 X zip ties

FLEX 4MM
4 X 12mm M3 Flat Hear Screws (Model is designed with flat head screws, adapt where necessary
2 X zip ties

WARNING: If using with a heavier action camera (e.g. GoPro 10) please ensure to tape down your covers during flight. There is a lot of weight on the top foam cover with only a few magnets holding it on. Don't lose your camera - use tape ;)

If this model helped you in any way shape or form - please rate, comment and or post a make if you can.

Enjoy!