This is one of my first experiments with HueForge, and I'm finally happy with the result.
Spiderman's image is generated by copilot (https://designer.microsoft.com/)
Check out my account and hit the "follow" button because I'll be posting more HueForge creations with a superhero theme in the next few days!

Print instruction

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 3mm and the Actual Depth is 3mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Army Blue
At layer #20 (1.68mm) swap to Red
At layer #30 (2.48mm) swap to White for the rest.