Rey with Gold Lightsaber
Rey with Gold Lightsaber
Print Profile(2)
Description
I actually do print all of the models I upload and that takes a time and filament.
Visit my Patreon (in bio or http://patreon.com/JustBe3D) if you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models.
Gold is one of the harder colors to get right but this one came out well. Adding the layer of brown below they yellow gives the gold look but is not required.
Can be rescaled just remember not to change the Z axis.
I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Dikale Brown Transmission Distance: 1
PLA Elegoo Yellow Transmission Distance: 7.2
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #16 (1.36mm) swap to White
At layer #22 (1.84mm) swap to Brown
At layer #23 (1.92mm) swap to Yellow for the rest.
Your last slider is set to 2.4mm which is lower than the model height.
Comment & Rating (14)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
