A 2D Hueforge card for the commander zone or for the window of the deckbox.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

I print with P1S 0.4 nozzle, you can use a 0.2 nozzle for better details.

Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Orange
PLA BambuLab Basic Gold
PLA BambuLab Basic White

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Orange
At layer #12 (1.04mm) swap to Gold
At layer #18 (1.52mm) swap to White for the rest.