Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.2
PLA BambuLab Basic Yellow Transmission Distance: 4.8
PLA Polylite Cold White Transmission Distance: 0.8
PLA BambuLab Basic Red Transmission Distance: 3.8

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Yellow
At layer #20 (1.68mm) swap to Cold White
At layer #22 (1.84mm) swap to Black
At layer #24 (2mm) swap to Red for the rest.