Gyro Fidget Spinner Keyring

Gyro Fidget Spinner Keyring

Boost
67
109
19

Print Profile(3)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
19 min
1 plate
4.7(9)

A1 Mini profile
A1 Mini profile
25 min
1 plate
5.0(3)

[A1 Mini] 0.2mm layer, 2 walls, 15% gyroid infill
[A1 Mini] 0.2mm layer, 2 walls, 15% gyroid infill
18 min
1 plate
5.0(1)

Boost
67
109
19
3
182
131
Released

Description

Gyro Fidget Spinner designed to look like a nut and fit on a keychain, I've printed these in PLA+ which works well, this one will need breaking in slightly, this is due to the tight tolerances then its quite smooth in operation.

I do have a larger one of these but not for a keychain feel free to have a look at that one. 

https://makerworld.com/en/models/459583

should you have any questions please ask, I'm happy to make amendments if required.

UPDATE - 

I've just uploaded the STL files with and without pivot points, a reviewer has requested if i could upload both. 

Comment & Rating (19)

Please fill in your opinion
(0/5000)

Print Profile
A1 Mini profile
came out great 👍
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Came out nicely and the spinning action is quite smooth. Should have printed it with support for the key chain loop. But that is my mistake as BambuStudio suggested to insert support when I opened the profile to print on my A1 Mini and I ignored it. Lesson learned. ;-)
0
Reply
Boosted
Nice. Printed well. One question, did you try making it without the pivot points? Just curious if they could be removed so the rings could spin on any axis or if it would fall apart.
The designer has replied
0
Reply
Hi, yes originally yes I did but they don't spin very well. abit annoying even if I made it very loose without the pivot points. Once I put the pivot points in place a world of difference with smoothness and the ability to spin for a while
0
Reply
Hi, Just to let you know I've uploaded the STL for download with and without the pivot points should you want to try them (knock your socks off)
0
Reply
Boosted
Replying to @luminaeclipse :
I'll try it out. I was attempting to edit it myself and my modeling skills aren't great yet. Saved me a ton of time.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
A1 Mini profile
0
Reply
hey I am doing a school craft show is there any way I could sell your design
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good print without any issue. Thank you,
0
Reply
Print Profile
[A1 Mini] 0.2mm layer, 2 walls, 15% gyroid infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.