关节可活动，没有使用支撑，目前只有单色，以后可能会出多色，暂时没有好的多色方案，大家有好的想法可以留言!

直接打印只需要2个小时左右，但是为了顶部曲面打印效果更好，我调整了自适应层高，打印时间就会增加到4个小时左右，放大或者缩小后效果会消失，需要重新调整，我试过最小50%打印，关节也可以自由活动！

• Joints can be moved, without the use of support, only monochrome at present, there may be multi-color in the future, there is no good multi-color scheme for the time being, everyone has a good idea can leave a message!
• Direct printing only takes about 2 hours, but in order to print the top surface better, I adjusted the adaptive layer height, Print time will increase to 4 hours or so, zoom in or out after the effect will disappear, need to re-adjust, I tried a minimum of 50% print, The joints are free to move!
• 最新3D打印宫崎骏《龙猫巴士》_哔哩哔哩_bilibili

达文西FPV的抖音 - 抖音 (douyin.com)