Bolt Action Pen

Copyright Claim

Bolt Action Pen

Boost
863
1194
259
GIF

Print Profile(6)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.4mm nozzle, 0.1mm layer, 2 walls, 20% infill
0.4mm nozzle, 0.1mm layer, 2 walls, 20% infill
Designer
1.4 h
1 plate
4.8(71)

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
2.1 h
1 plate
4.8(16)

0.4 nozzle,0.12mm layer, 2 walls, 15% infill
0.4 nozzle,0.12mm layer, 2 walls, 15% infill
1.9 h
1 plate
4.8(36)

[0.4 Nozzle] Extra Fine, 0.08mm layer, 2 walls, 15% infill
[0.4 Nozzle] Extra Fine, 0.08mm layer, 2 walls, 15% infill
3.2 h
2 plates
4.6(8)
Click to see more

Boost
863
1194
259
124
1.6 k
1.1 k
Released

Description

A bolt action pen that uses the standard Pilot G2 insert. The 0.2mm nozzle allows for precise tolerances that allow the bolt and threads to work seamlessly. The pen can be printed all in one plate or separate to print colors to mix and match each part. The Pilot G2 can be purchased at any office supply store and is widely available, making this a highly accessible EDC pen.

Comment & Rating (259)

Please fill in your opinion
(0/5000)

Print Profile
0.4mm nozzle, 0.1mm layer, 2 walls, 20% infill
great print wish there was guide to put together
The designer has replied
4
Reply
https://www.instagram.com/reel/C664FvOvN0t/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==
(Edited)
1
Reply
Check this video out!
(Edited)
1
Reply
Replying to @assortm3nt :
This link doesn’t work for me
0
Reply
Such a good print!! I printed it on my A1 Mini with a 0.4mm nozzle. Printed at 0.1mm layers, 2 walls, and a 20% infill. It feels super sturdy and nice in the hand. I printed with default tree supports that and brims. Cleaned up really nicely. Also, I used a Pentel EnerGel insert for the ink and it worked great. The spring I used was from a Pilot G2 though.
(Edited)
The designer has replied
5
Reply
That marble filament looks sick! Thanks for testing the EnerGel insert!
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
The printed fine on a 0.4mm nozzle. I did a little sanding on the edges that were brimmed but that was pretty much it. excellent design!
The designer has replied
3
Reply
yep I designed to work with .01 layer height on a .4 nozzle! Glad you like the design enjoy! have fun mixing the colors around!
0
Reply
Confirmed to work with Sharpie S Gels. Printed with 0.2mm Nozzle. Works great!
The designer has replied
2
Reply
awesome thanks for testing!
0
Reply
Print Profile
0.4 nozzle,0.12mm layer, 2 walls, 15% infill
printed flawlessly, each small piece popped off of supports without issue, threads work perfectly. had some small overhang stringing in the bolt mechanism hole of the pen body but it was easy to cut away. Awesome little design!
1
Reply
Love the colors, glad you like the design!
(Edited)
1
Reply
I like! thank you very much !
The designer has replied
1
Reply
love the orange!
0
Reply
Print Profile
0.4 nozzle,0.12mm layer, 2 walls, 15% infill
Pentel EnerGel 0.7 ink and spring work well, too!!
1
Reply
Thanks for testing it out for me! I appreciate the boost!
0
Reply
Boosted
Loved this! Very easy to assemble and works great!!!!
The designer has replied
1
Reply
Glad you like it, thanks for the boost!
0
Reply
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
gorgeous
The designer has replied
1
Reply
Glad you like it, thanks for the boost!
0
Reply
Boosted
Print Profile
0.4mm nozzle, 0.1mm layer, 2 walls, 20% infill
A1, .4 @.12 layer hight. turned out great, G2 guts.
The designer has replied
1
Reply
Sweet! I appreciate the boost
0
Reply