Toothbrush Travel Case V2

Copyright Claim

Toothbrush Travel Case V2

Boost
37
76
26

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 6 walls, 25% infill
0.2mm layer, 6 walls, 25% infill
Designer
4.4 h
1 plate
4.9(14)

Boost
37
76
26
12
87
68
Released

Description

Introducing the Toothbrush Travel Case V2

– now 20% smaller but 100% more fabulous! If you thought Version 1 was the bee's knees, wait until you see the upgrades on this beauty.

Crafted by me, your friendly neighborhood 3D printing enthusiast, this case is a labor of love. Gone are the days of awkwardly large cases; our V2 fits snugly in your hand like it was custom-made just for you. Plus, I’ve added a dedicated spot for your toothpaste, so your entire dental regime travels together in harmony. The newly improved toothbrush head holder ensures your brush stays as still as a yoga master in a zen garden, no wobbles, no worries.

 

Print all parts in one go – this case is a marvel of compact efficiency! I recommend using supports for printing and opting for high wall thickness to ensure your travel case withstands the rigors of your adventurous lifestyle.

So why wait? Upgrade your travel game with the Ultimate Toothbrush Travel Case V2. Your teeth – and your travel kit – deserve the best!

Comment & Rating (26)

Please fill in your opinion
(0/5000)

is there a correct way to free the hinges? it seems like mine have fused together during the print or there isn't enough of a gap
1
Reply
AS for me : hinges have fused together
1
Reply
Replying to @anthonny.barbel :
it's not just me then
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Druckprofil ist sehr gut. Ich bin begeistert.
The designer has replied
1
Reply
Danke!! :D Sieht super aus in Schwarz weiß!
0
Reply
Boosted
Print Profile
0.2mm layer, 6 walls, 25% infill
turned out great
The designer has replied
1
Reply
Thanks!
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
As this model does not fit my A1 mini, I printed each part separatedly and forced joined them after. I had to do some cutting, but the hinge still works and feels safe enough. A native A1 mini version would be welcome though.
The designer has replied
1
Reply
Thanks! That's a smart way to do it. I do maybe a A1 Mini version in the future
0
Reply
I really like this one a lot! Thanks for making and sharing it!
1
Reply
The case is a bit too tight for my Oral-B Pro 3000 and doesn't fully close, but it still works splendidly. For the next case, I will try scaling it to 105%.
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
worked splendid this week while i was on vacation!
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Perfect design, thanks !
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Other Issues:hinges fused during print, unable to free them, snapped the top case nwhen trying to free them next to the lower hinge when trying to free them
The designer has replied
1
Reply
That's very weird. It seems your settings for the filament are not right and you need to adjust the flow rate. I have printed it many times, even with no-name filament. However, with no-name filament, I always check the quality before printing. If it's not great, you can edit the settings with the Bambu Lab Slicer. That works very well for me.
0
Reply
Replying to @christian.drat :
that's unusual, I'm using esun pla+ with the downloaded esun pla+ profiles from their website, haven't had issues printing with their profiles
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
The best design I have aeeen in a while
0
Reply