Closet bag hanger wardrobe backpack hook
Copyright Claim
Closet bag hanger wardrobe backpack hook
Boost
176
291
52
Print Profile(1)
0.2mm layer, 4 walls, 20% infill
Designer
1.5 h
1 plate
Boost
176
291
52
16
242
188
Released
Description
Bag hanger for closet with hanging rod
About
I wanted to hang my backpacks from the hanging rod in a spare closet, and designed this hanger/hook. It has a rotating mid-joint, primarily to enable printing in the strongest orientation.
Printing
- Print-in-place rotating joint. Please use 0.4mm nozzle.
- No supports needed.
- Use strong filament, ie, do not use softer filaments like silk.
- Use filament with less shrinkage rate. This helps with the printing of the rotating mid-joint.
Assembly/Use
- After printing the hanger, allow it to cool, then work the rotating joint loose.
- Rotate the two halves and align the two notches to orientate the hanger correctly.
Please check out my other models, TYSM! I test and refine my models extensively before sharing.
___
Comment & Rating (52)
All
Print Profile
0.2mm layer, 4 walls, 20% infill
Printed several of these in generic PETG, no supports.
Used 4 perimeters at 0.2mm layer height.
Nice print-in-place design. Works as intended and is pretty robust!
The designer has replied
1
Reply
Thanks for sharing the photos! PETG is great for this application.
0
Reply
Clever design
The designer has replied
1
Reply
Thanks for sharing your print photo!
0
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 20% infill
great design & excellent print profile. I used a basic matte PLA & it holds my framed hiking backpack no problem. printing another now!
(Edited)
The designer has replied
1
Reply
Thank you for the Boosts and rating, I appreciate the support very much!
0
Reply
Print Profile
0.2mm layer, 4 walls, 20% infill
Exelent!
(Edited)
The designer has replied
1
Reply
Thank you for the kind rating and sharing your print photo.
0
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 20% infill
Printed with Bambu PLA Basic and added Brim, holding up fine so far, good produkt.
The designer has replied
1
Reply
Thank you for sharing your print photos and the kind comment! :)
(Edited)1
Reply
Print Profile
0.2mm layer, 4 walls, 20% infill
passt per
The designer has replied
1
Reply
Thank you for sharing photos of your print!
0
Reply
Print Profile
0.2mm layer, 4 walls, 20% infill
The designer has replied
1
Reply
Thanks for sharing the photos and btw, I really enjoy your TikTok channel! It's what planted the seeds to get into the Bambu Lab ecosystem :)
0
Reply
Boosted
Honestly, I didn't think that this would hold much weight because of the swivel mechanism but had some ABS loaded up and gave it a shot with ABS. Worked great! I use them to hang my backpacks in a closet.
The designer has replied
3
Reply
Thank you for giving the hanger a try and for the Boost too, I appreciated it greatly!
0
Reply
Boosted
Still hanging on, pla doesn't fail :)
The designer has replied
1
Reply
Great! Thank you for the Boost too!
0
Reply
Boosted
Awesome! Just what I needed!
The designer has replied
1
Reply
Thank you for the Boost and comment :). Greatly appreciated!
0
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld