Magnetic rotating fidget toy with extreme feedback.
Uses 14 to 24 pieces of 6x6mm round magnets [the more magnets you insert, the more feedback you will get] and a 27x20x4mm bearing (available on maker supply).
Tips:
- Observe magnets polarity. Assembly is done without glue, so you can rotate magnets in case of mistake.
- Use remaining magnets to pull magnets into place
Assembly instructions:
- Start with bottom half, insert 8 magnets into slots and lock them with Lock ring.
- Insert desired amount of magnets to the top half - distribute them evenly and/or symmetrically. Lock each separate magnet with a latch. Thinner part of the latch should be aiming upwards.
- Insert a beraing and assemble two pieces. Tyey won't separate due to magnetic force of the magnets.