I only use NuMakers it works great with either AMS Use this link for an additional discount. https://numakers.com/?ref=09v0k1co

Print Profile works nice. But here are the settings used.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.7mm and the Actual Depth is 2.8mm

Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 1.6
PLA+ Numakers Dark Gray Transmission Distance: 4.8
PLA+ Numakers Light Gray Transmission Distance: 3.2
PLA+ Numakers Pure White Transmission Distance: 4.8
This print uses 4 unique filaments

Swap Instructions:
Start with Pitch Black
At layer #7 (0.64mm) swap to Dark Gray
At layer #11 (0.96mm) swap to Light Gray
At layer #16 (1.36mm) swap to Pure White for the rest.